Danfoss Pressure Switches
Danfoss pressure switches are used to control pumps in a pressurised irrigation or water system. Various pressure ranges and adjustable pressure differential versions available.
|
Danfoss CS Pressure Switch 2 to 6 bar. IP55 Easy Adjust. ½" BSPF 0.72 to 2 bar d STOCK CODE: PSDFCS06 Supplier SKU: 031E021566 |
||
|
Danfoss KPi35 Pressure Switch 0.2 to 8 bar. IP30 ¼" BSPM 0.4 to1.5 bar diff. STOCK CODE: PSDFKP08 Supplier SKU: 060-121766 |
||
|
Danfoss KPi36 Pressure Switch 4 to 12 bar. IP30. ¼" BSPM 0.5 to 1.6 bar diff. STOCK CODE: PSDFKP12 Supplier SKU: 060-118966 |
||
|
Danfoss KP36 Pressure Switch 2 to 14 bar IP30. ¼" BSPM 0.7 to 4.0 bar diff. STOCK CODE: PSDFKP14 Supplier SKU: 060-110866 |
Danfoss MBS 3000 Transducers
The Danfoss MBS 3000 range of pressure transducers are used in many industrial applications. They can be found on many Grundfos booster pump sets.The models listed have an output of 4-20mA
If the model you require is not listed, please contact the office.
|
Danfoss MBS 3000 Pressure Transducer 0-4 bar. 4-20mA Output. ½" BSPM STOCK CODE: GFOS96637450 Supplier SKU: 060G4062 |
||
|
Danfoss MBS 3000 Pressure Transducer 0-6 bar. 4-20mA Output. ½" BSPM STOCK CODE: GFOS96637451 Supplier SKU: 060G1414 |
||
|
Danfoss MBS 3000 Pressure Transducer 0-10 bar. 4-20mA Output. ½" BSPM STOCK CODE: GFOS96637452 Supplier SKU: 060G1412 |
||
|
Danfoss MBS 3000 Pressure Transducer 0-16 bar. 4-20mA Output. ½" BSPM STOCK CODE: GFOS96637453 Supplier SKU: 060G1413 |
Grundfos Pressure Manager
The Grundfos PM1 and PM2 pressure managers are designed to automatically start/stop water supply pumps. This fully automatic pressurisation device incorporating an electronic pressure switch, dry run protection, cycling alarm and non return valve.
This unit also replaces the need for a traditional pressure switch, vessel, dry run protection and non return valve all installed on a manifold. The unit can be fitted to any pump with a min outlet pressure of 1.5 Bar and up to a maximum of 10 Bar. Max flow rate is 10 m³/h.
The unit will turn on the power to run the pump the moment there is a flow demand. The unit requires a 230 volt single phase electric supply. 1" BSPM bottom inlet and 1" BSPM top outlet.
Two models available, PM-1 version up to 6 amp with fixed start pressure of 1.5 Bar and 2.2 Bar and PM-2 version up to 10 amp with adjustable start pressure from 1.5 to 5 Bar.
|
Grundfos Pressure Manager. Cut in 1.5 Bar Cut out at 0 flow. Max 6 amp motor STOCK CODE: GFOSPM1-15 Supplier SKU: 96848670 |
||
|
Grundfos Pressure Manager. Cut in 2.2 Bar Cut out at 0 flow. Max 6 amp motor STOCK CODE: GFOSPM1-22 Supplier SKU: 96848701 |
||
|
Grundfos Pressure Manager. Cut in 1.5-5.5 Bar Cut out at 0 flow. Max 10amp motor STOCK CODE: GFOSPM2-AD Supplier SKU: 96848738 |
Grundfos Pressure Transducer
The RPI relative-pressure transmitter from Grundfos Direct Sensors™ is designed for industrial applications. The transmitter is designed to be mounted direct on a unit, for example a pump. The RPI transmitter is fully compatible with aqueous media. The transmitter is based on MEMS sensing technology in combination with the corrosion-resistant Silicoat® coating technology on the transmitter chip. This makes the RPI transmitter very robust and ideal for pump integration and monitoring in harsh environments.
|
Grundfos Pressure Sensor (Relative) 0-6 bar RPI with ½" BSPM IP67 STOCK CODE: GFOSPSRPI0-06 Supplier SKU: 97748922 |
||
|
Grundfos Pressure Sensor (Relative) 0-10 bar RPI with ½" BSPM IP67 STOCK CODE: GFOSPSRPI0-10 Supplier SKU: 97748923 |
||
|
Grundfos Pressure Sensor (Relative) 0-16 bar RPI with ½" BSPM IP67 STOCK CODE: GFOSPSRPI0-16 Supplier SKU: 97748924 |
||
|
Grundfos Pressure Sensor (Relative) Long Cable - 5metres STOCK CODE: GFOSPSRPI5M Supplier SKU: 98374271 |
Lowara Genyo Pressure Control
Lowara Genyo pressure control switch is a fully automatic device for controlling a water pump in a pressurised system. This device incorporates an electronic pressure switch, dry run protection, alarm light, pressure gauge and non return valve.
This unit replaces the need for using a traditional pressure switch, non return valve and dry run protection (via a pump control panel) and is installed on the pump discharge outlet. The unit can be fitted to any pump with an outlet pressure of 1.2 bar and up, with a maximum current of 8A or 16A (model dependent). Maximum flow rate is 10m³/hr.
The Genyo PLUS features a digital pressure gauge and amongst many features can be used in parellel with another Genyo PLUS to control 2 pumps
|
Lowara Genyo PLUS 1" Pressure Controller. 230/1/50Hz. Max 16 amps 2.2Kw STOCK CODE: LOWGENYO16APLUS Supplier SKU: 109120250 |
||
|
Lowara Genyo 1.5-3 bar start 1" Pressure Controller. 230/1/50Hz. Max 16A/10 Bar STOCK CODE: LOWGENYO16AR15-25 Supplier SKU: 109120210 |
||
|
Lowara Genyo 1.2 bar start 1" Pressure Controller 230/1/50Hz. Max 8A & 10 Bar. STOCK CODE: LOWGENYO8AF12 Supplier SKU: 109120160 |
||
|
Lowara Genyo 1.5 bar start 1" Pressure Controller 230/1/50Hz. Max 8A & 10 Bar. STOCK CODE: LOWGENYO8AF15 Supplier SKU: 109120170 |
||
|
Lowara Genyo 2.2 bar start 1" Pressure Controller 230/1/50Hz. Max 8A & 10 Bar. STOCK CODE: LOWGENYO8AF22 Supplier SKU: 109120180 |
||
|
Lowara Genyo 1" Extension Bush for fitting Genyo 16A models to e-HM range pumps STOCK CODE: LOWGENYOEXTBUSH Supplier SKU: 002671374 |
Telemechanique Pressure Switch
For use in a pressurised water system, allowing setting of the cut-in and cut-off pressure required by the system. It should be installed with a pressure vessel to allow for small fluctuations in pressure and with a pressure gauge to monitor operation.
Adjustable from 0-6 bar to 0-12 bar, dependant on model.
|
Telemechanique XMP06 Pressure Switch 0.9 to 6 Bar STOCK CODE: PSXMP06 Supplier SKU: XMPA06B2131 |
||
|
Telemechanique XMP12 Pressure Switch 1.2 to 12 Bar STOCK CODE: PSXMP12 Supplier SKU: XMPA12B2131 |